2025 Bush Hog® DSP Series 12

Current Bush Hog® Construction Pull-Dirt-Scrapers DSP Series

Swipe to View More

Year 2025
Make Bush Hog®
Model DSP Series

Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle, is ideal for moving large quantities of material, leveling, and finish grading. The DSP units come available in 8’, 10’ and 12’ widths. DSP scrapers can do everything the standard axle does, as well as remove material on an angle for sloping, terracing and ditching. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade into lower areas. The DSP scrapers are designed for 70 to 125 horsepower tractors and have replaceable wear plates on the sides.

Features may include:

Available in 8-foot, 10-foot, and 12-foot widths

DSP scrapers are designed for 70 to 125 horsepower tractors

Replaceable wear plates on the sides.

Engine

Engine Power Horsepower Rating: 70 To 125

Wheels & Tires

Tires, Rear Specification New 9.5L X 15 8 Ply Rib Tl On Rim 5 With 5.5 Bhc

Operational

Operating Speed Maximum Transport Speed: 20 Mph

Dimensions

Transport Width 144 3/16-Inches

Width, Working Position 144 3/16-Inches

Depth, Maximum Of Box: 39-Inches | Cutting: 5-Inches Below Grade

Dimensions Moldboard Construction: 1/4-Inch X 24 1/4-Inches High When Formed | Side Plate Construction: 3/8×24 5/16-Inches High X 39 3/4Inches Deep | Tongue Construction: 4×4-Inches X 1/4-Inch Tubing \ Dump Clearance: 21-Inches | Maximum Tilt Depth To The Right: 8 1/4-Inches | Maximum Tilt Angle: 3 1/2°

Cutting Edge Size 1/2-Inch X 6-Inches Reversible & Replaceable | Reinforcement: 3-Inches X 3-Inches X 5/16-Inch Angle Plus A 1/4-Inch Mold Board = 9/16-Inch At The Cutting Edge

Lift Cylinders 3 1/2-Inches X 8-Inches Asae | Tilt: 3 1/2-Inches X 8-Inches Asae

2025 Bush Hog® DSP Series 12