New Holland hay baler, mower conditioner, disc mower
and hay equipment at Hendrix Tractor in Alabama
NEW HOLLAND HAY EQUIPMENT
New Holland Mowers
Designed to play tough with difficult cutting conditions.
Fire ant hills, gopher mounds and thick, wet grasses are no match for New Holland mowers. They're designed to breeze through the toughest conditions with non-stop, trouble-free cutting for a clean, even cut in less time. Choose from economy models, heavy-duty models and the new pull-type model. Cutting widths range from 5.5 to over 10 feet wide.
| Model | Cutting Width | Hitch |
Minimum PTO hp |
| HM234 | 5ft. 6in. | Cat. I or II | 35 |
| HM235 | 6ft. 9in. | Cat. I or II | 45 |
| HM236 | 7ft. 11in. | Cat. II | 50 |
| HM6730 | 6ft. 8in. | Cat. I or II | 45 |
| HM6740 | 7ft. 10in. | Cat. II | 55 |
| HM6750 | 9ft. 2in. | Cat. II | 60 |
| HM6830 | 10ft. 4in. | Pull Type | 65 |
| Model | Cutterbar Length | Overall Length | Tractor Requirements |
| Sicklebar451 | 7ft 3in. or 9ft. 3in. | 3ft. 11in. |
Fits most Cat I and II 3-point hitch tractors with 540 rpm PTO |
| Sicklebar456 | 9ft. 3in. | 7ft. 6in. |
Fits most tractors with standard ASAE drawbar and 540 rpm PTO |
New Holland Tedders
Win the race against the weather.
If you're in a race against bad weather, a New Holland tedder can increase your odds. A tedder fluffs up hay so air flows through it, not over it, to speed drying and allow you to bale sooner — before it rains. And if showers do hit when you have windrows or swaths in the field, your tedder can spread damp, matted-down crop, distributing it evenly for quick drying.
| Model | Rotors |
Tine Arms
per Rotor |
Tedding Width |
PTO ho Required |
Folding |
| H5270 Pull Type | 6 | 7 Tine Arms | 25ft. 7in. | 35 | Hydraulic |
| 163 Pull Type | 4 | 6 Tine Arms | 16ft. 5in. | 20 | Mechanical or Hydraulic |
New Holland Rakes
Pick up more of your valuable hay.
New Holland Rolabar® rakes let you feed cleaner hay and more of it. Offset wheels are set close to the basket, so tines follow the ground contour closely to pick up all the hay — but leave dirt behind.
| Model | Raking Width | Drive |
| 256 | 8ft. 6in. Ground drive, left-hand delivery | 26.5 - 24.9 |
| 258 | 9ft. 6in. | NA - 28.9 |
| 260 | 9ft. 6in. | NA - 28.9 |
| 252 | 24ft. with two 9ft. 6in. rakes | NA - 28.9 |
| 57 | 8ft. 6in. | NA - 28.9 |
| 216 | 10ft. 6in. each basket | NA - 28.9 |
| Model | Number of Wheels | Working Width | Min. Required Tractor hp |
| HT152 | 8-10 | 17ft. 5in. - 20ft. 4in. | 30hp |
| HT154 | 12-20 | 25ft. - 36ft. | 30hp - 55hp |
New Holland ProCart Deluxe Carted Wheel Rake
Pick up more of your valuable hay.
New Holland ProCart™ deluxe carted wheel rakes are the professional's choice for big raking capacity. They offer dependable, high-speed raking, allowing you to create windrows that are easy to bale. Whatever conditions you face – from heavy windrows to tedded or thick, wide swaths – ProCart wheel rakes make short work of raking. Individual floating rake wheels and newly optimized raking angles provide cleaner raking and help form more uniform easier to bale windrows so you can put up quality hay quickly. The well-built frame provides the strength and reliability you need, and it’s compact and stable so you can move fast between farm and field.
| Model | Weight, lbs. | Raking Width | Minimum hp |
| 819 8-Wheel | 1675 | 18' 0" | 30 |
| 1022 10-Wheel | 1875 | 21' 0" | 30 |
| 1225 12-Wheel | 2115 | 24' 6" | 50 |
New Holland Disc Mower Conditioners
Fast field speeds, quick drydown and earlier baling.
Discbine® disc mower-conditioners quickly turn standing crop into fast-drying windrows or swaths. They slice through thick, tangled, wet crops and mow through fire ant hills and gopher mounds without missing a beat. The New Holland Discbine line ranges from seven-disc models that cut a nine-foot swath up to 12-disc models that sweep through 15 ft. 7 in. at a time.
| Model | Number of Discs | Cutting Width | Conditioning System | Tongue System |
| H7220 | 7 | 9ft. 2in. | Rubber Rolls | Straight Tongue |
| H7230 | 8 | 10ft. 4in. | Rubber Rolls | Bent Tongue |
| H7320 | 7 | 9ft. 2in. | Flails | Straight Tongue |
| H7330 | 8 | 10ft. 4in. | Flails | Bent Tongue |
| H7450 | 10 | 13ft. | Rubber Rolls | Center Pivot |
| H7460 | 12 | 15ft. 7in. | Rubber Rolls | Center Pivot |
| H7550 | 10 | 13ft. | Flails | Center Pivot |
| H7560 | 12 | 15ft. 7in. | Flails | Center Pivot |
New Holland Haybine Mower Conditioners
The best in plug-free cutting and conditioning.
When it's time to buy a mower-conditioner, go with a genuine New Holland Haybine® mower-conditioner, the one that started it all. Dependable Haybine mower-conditioners cut smoothly through heavy crops and produce well-conditioned, fast-drying swaths or windrows.
| Model | Width | Conditioning Roll Length (Crushing Area) |
| 472 | 7ft. 3in. | 85in. |
| 488 | 9ft. 3in. | 102in. |
| 499 | 12ft. 3in. pivot tongue | 110in. |
New Holland Small Square Balers
A proud heritage.
Over 70 years ago, New Holland introduced the first successful automatic hay baler. Farmers rushed to buy it, and that's the way it continues. You can rely on your New Holland baler to produce consistent bales every time. There are three different 14 x 18 models, plus a high-output 16 x 18 model. Choose the one that meets your needs. All are designed to provide years of reliable service.
| Model |
Minimum hp Required |
Bale Cross
Section Size |
Super-Sweep Pickup |
Plunger Speed |
| BC5050 | 35 PTO | 14 x 18in. | 65in. | 93 strokes/min. |
| BC5060 | 62 PTO | 14 x 18in. | 65in. | 93 strokes/min. |
| BC5070 | 75 PTO | 14 x 18in. | 75in. | 93 strokes/min. |
| BC5070 Hayliner | 75 PTO | 14 x 18in. | 75in. | 93 strokes/min. |
| BC5080 | 80 PTO | 16 x 18in. | 75in. | 93 strokes/min. |
New Holland Large Square Balers
Dense, uniform bales that stay that way.
New Holland BB9000 large square balers deliver perfectly shaped bales that stand up easily to handling and transport. These new balers offer features that add to your productivity and your baler's reliability and performance.
| Model | Bale Width | Bale Height | Bale Length |
Minimum Tractor hp Required |
| BB9060 | 31.5in. | 35.4in. | 102.3in. max. | 102 hp |
| BB9060 CropCutter Packer Cutter | 31.5in. | 35.4in. | 102.3in. max. | 110 hp |
| BB9060 CropCutter Rotor Cutter | 31.5in. | 35.4in. | 102.3in. max. | 130 hp |
| BB9080 | 47.3in. | 35.4in. | 102.3in. max. | 122 hp |
| BB9080 CropCutter Rotor Cutter | 47.3in. | 35.4in. | 102.3in. max. | 150 hp |
New Holland Round Balers
Tight, uniform bales in any crop or condition
You’re always looking for a better way to bale. Well, look no further than the BR7000 Series round balers! New Holland offers
11 distinct Roll-Belt™ baler models that produce bales weighing from 300 to 2,200 pounds. Some are specially designed to bale crops with moisture content up to 65 percent for high-quality round bale silage.
| Model | Bale Diameter, in. | Bale Width, in. | Bale Weight, lbs. | Bale Density |
| BR7050 | 30-48 | 46.5 | 300-750 | Adjustable |
| BR7050 High-Moisture | 30-48 | 46.5 | 400-1,000 | Adjustable |
| BR7060 Standard | 36-60 | 46.5 | 400-1,200 | Adjustable |
| BR7060 | 36-60 | 46.5 | 400-1,200 | Adjustable |
| BR7060 Silage Special | 36-60 | 46.5 | 400-1,200 | Adjustable |
| BR7060 CropCutter | 36-60 | 46.5 | 400-1,800 | Adjustable |
| BR7070 All-Purpose | 36-72 | 46.5 | 400-2,200 | Adjustable |
| BR7070 CropCutter | 36-72 | 46.5 | 400-2,200 | Adjustable |
| BR7080 Silage Special | 36-60 | 61.5 | 500-1,550 | Adjustable |
| BR7090 Silage Special | 36-72 | 61.5 | 500-2,200 | Adjustable |
| BR7090 Speciality Crop | 36-72 | 61.5 | 500-2,200 | Adjustable |
| Roll-Belt-450-Utility | 36-60 | 46.5 | 400-1,000 | Adjustable |
